We source the resin — and own the outcome.
PET by IV grade — bottle, preform and sheet — plus PP, HDPE, LDPE, LLDPE, masterbatch, additives and food-contact rPET, matched to your conversion process and supplied across Egypt. On the lines we take to our own book, we finance the goods, commission independent third-party QC, and clear them as the importer of record.
A resin that runs clean, holds its grade, and carries the paperwork.
Converters and packaging engineers come to us with the same four pressures.
“Grade drift between lots.”
A drum that meets spec on paper but shifts in IV or MFI lot to lot turns into rejects at the press. We match to a fixed grade window and hold the make to it.
“It has to run on my line.”
The wrong melt flow or density stalls injection, stretch-blow, extrusion or thermoforming. We source to your conversion process — not just the polymer name.
“The food-contact paperwork I can’t get.”
Your customer asks for migration compliance against EU 10/2011 or FDA, and the maker goes quiet. We assemble the document pack from the maker so the requirement is met on file.
“Import exposure on a weekly material.”
Pre-payment, customs and a long lead on a line you run every week is risk you carry alone. On the lines we take to our own book, we carry it instead.
The polymers we carry
Food-grade resins and the colour and additive systems that run with them — specified by grade, not guesswork.
PET — bottle & preform
By IV grade · stretch-blow / injection · clear & coloured.
PET — sheet
By IV grade · thermoforming · APET / food-contact.
rPET (recycled)
Food-contact where applicable · recyclate content to spec · migration compliance pack.
Polypropylene (PP)
By MFI · injection / thermoforming · homo & copolymer.
HDPE
By density & MFI · blow / injection · food-contact grades.
LDPE / LLDPE
By density & MFI · extrusion / film / lamination.
Masterbatch & additives
Colour to reference · process aids · food-contact carriers.
Two ways we back it.
Every resin line runs through one of two engines. We tell you which one applies before you order.
Technical Sourcing
We match the grade, not just the price.
- Source to your spec — polymer grade, IV or MFI, density and conversion process.
- Match to a maker who can hold that grade window, lot to lot.
- Colour & recyclate matched to your reference; we confirm what the maker can supply.
- Sourced lines — we pass through the maker’s CoA and arrange independent testing on request.
Owned-Risk Supply
We carry the risk; you carry the resin.
- We take title & finance the goods against your signed-off grade.
- We supervise the make and commission independent third-party QC where appropriate before shipment.
- Importer of record — we clear it into Egypt under our own registrations.
- Warehouse & replenish on your production schedule — you draw down product, not exposure.
What to send us — and we’ll match a grade
The more of this we have, the faster we match and quote.
Polymer & application
e.g. PET preform, PP thermoformed tray, HDPE bottle.
Target grade
IV for PET; MFI and density for PP/PE.
Conversion process
Injection, stretch-blow, extrusion or thermoforming.
Food-contact requirement
e.g. EU 10/2011, FDA, plus any customer-specific spec.
Colour / recyclate
Masterbatch reference, and recyclate content if rPET.
Volume & cadence
Per order, delivery cadence, and destination in Egypt.
How we take title, run independent inspection and stay accountable is the same on every line — see how we work, and how to check it →
Documentation & resources
Reading PET by IV grade — matching resin to preform and stretch-blow
Food-contact for converters — what EU 10/2011 and FDA actually ask you to hold
Specifying rPET — recyclate content, food-contact use, and the paperwork that comes with it
Send the spec. We’ll match the grade — and back it.
Give us the polymer, the grade window and your conversion process. We’ll match a resin that runs on your line, assemble the food-contact paperwork from the maker, and — on the lines we take to our own book — finance it, QC it and import it under our own name.